Results 1 - 4 of 4
Can I order a balun without a case?
Balun for Use Inside a Homebrew Tuner for Multi-Band Operations
DX Engineering sells only complete, external current baluns. DX Engineering special applications 1:1 current baluns are engineered to be used simply and easily on the output side of a tuner, to achieve the same multi-band tuning results with a stand...
Should a balun be used on a G5RV wire dipole antenna?
A balun or choke should NOT be used on a G5RV wire dipole. The classic G5RV 102 ft. wire dipole consists of 51 ft. legs with a center feed of twin lead or ladder line that is about 34 ft. long. That section is also part of the radiating antenna, an...
What balun do I need for a coax-fed long wire antenna with coax shield grounded to the tower?
The suggested balun is a 4:1 ratio current balun for long wire antennas. The DX Engineering part number of the correct balun is either the DXE-BAL200-H10-AT or the DXE-BAL200-H11-CT current balun designed to work with an antenna tuner. ...
Which balun would work on my Cushcraft X7?
There are two 4:1 models suitable for your Cushcraft X-7 beam. For Yagi Installations The DXE-BAL200-H10-A often produces results that routinely exceed our customers' expectations. Several Amateurs who have upgraded to a DX Engineering balun repor...